1. Overview
Smart BMS technology is adopted for battery modules of NPFC series to assure
smart automatic management for batteries. Features of BMS are shown as below:
• There is a centralized monitoring unit in BMS. Functions such as monitoring,
protection and communication are available. Battery modules can be controlled
remotely by staffs in control center. NPFC series are in line with the
requirements of the development of modern communications technology.
• It is combined by technologies of power source and computer. Parameters and
status of rectifiers and AC/DC distributions can be detected and controlled.
• Excellent electromagnetic compatibility. BMS used for battery modules of NPFC
series can comply with the outdoor power plants during operation, no interfere with
each other.
• BMS can provide protections against overcharge, over-discharge, over-
temperature, overcurrent, short circuit, etc., to assure reliable safety and operation
life.
• With patented cell balancing technology, BMS provide high efficiency for cell
balancing and prolong system operate life.
• Configuration flexibility, support parallel connection expansion
2. BMS appearance
Fig. 2.1 BMS PCB Front side
To Next Page
Loading...
