NARDA FieldMan Quick Start Guide

3 General operation
32 FieldMan Narda
EN
3.2.2 Selecting an operating mode
3.2.3 Changing the measurement settings in an
operating mode
3.2.4 Starting and pausing/stopping a
measurement
3.2.5 Changing the device settings
3.2.6 Exiting a submenu
⇒ Press SK1 , use the ▲▼ keys to highlight an entry, and use the ● key to select
it.
⇒ For information on the operating modes, see 5 Operating modes on page 36.
✓ The desired operating mode is active.
⇒ Press SK2 , use the ▲▼ keys to highlight an entry, and use the ● key to select
it.
⇒ For information on the menus and functions, see the descriptions of the respective
operating mode in the instruction manual.
Simplified representation
In the following descriptions, this simplified representation is used for changes in the
measurement settings:
⇒ MEASUREMENT SETTINGS: ... (corresponding action).
⇒ Press SK3.
⇒ Press SK4 .
⇒ For information on device settings, see 4 Device settings on page 34.
⇒ Press key.
FieldMan_KBA.book Seite 32

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English