NARDA FieldMan Quick Start Guide

5 Operating modes
36 FieldMan Narda
EN
5 Operating modes
Depending on the connected and recognized probe type, the following operating modes
are available for selection in the FieldMan:
⇒ Detailed information about all operating modes can be found in the instruction man-
ual.
Operating mode (abbre-
viation
1)
)
HF probes HP-01
(DC/LF)
EHP-50F/G
(LF)
BFD-400-1/3
(NF)
FIELD STRENGTH (FS) X X X X
SPATIAL AVERAGE (SA) X X X X
TIMER LOGGING (TL) X X X X
SPECTRUM (SP) – X X X
SHAPED TIME DOMAIN
(ST)
– – X X
SCOPE (SC) – – – X
1) Name displayed on the soft key in connection with the mode symbol
The operating mode is selected and displayed on the device via SK1. SK1 is only
available for selection when a valid probe has been detected.
FieldMan_KBA.book Seite 36

NARDA FieldMan Specifications

General

Brand	NARDA
Model	FieldMan
Category	Measuring Instruments
Language	English