31Nardalert S3 Narda
6 Instrument maintenance
6.1 Cleaning the monitor
6.2 Verication overview
6.3 Authorized service centers
6.4 Disposal
6.1 Cleaning the monitor
NOTICE
Damage to the monitor from liquids
The instrument may be damaged or destroyed if
liquids are allowed to get inside the casing.
Make sure that no liquid gets inside the
instrument
NOTICE
Solvents
Solvents can corrode the surfaces of the basic
unit, sensor and AC Adapter / Charger.
You must not use solvents to clean the basic
unit, sensor and AC Adapter / Charger.
1. Use a soft cloth to clean the monitor. You can use lukewarm water to
which a little detergent solution has been added as a cleansing agent.
2. To prevent streaks and spots, wipe o the monitor with a dry cloth
while it is still damp.
To Next Page
Loading...
Need help?
General