NARDA nardalert S3 - 7.1 Monitor Specifications

Narda 38 Nardalert S3
7 Specications
7.1 Monitor specications
Display Type TFT Transmissive
Display Size 1.77 inches, 28 x 35 mm, 128 x 160 pixels
Backlight White LEDs
Display Refresh Rate 250 msec.
Memory
Storage Rate
Storage Time
62,000 events
4 per second, 1 per second, 1 per 5 seconds,
1 per 10 seconds, 1 per 20 seconds, 1 per 60 seconds
Variable - from 4.3 hours (4 per second),
to 43 Days (1 per 60 seconds)
Remote Operation
USB
Optical Interface
Via USB or Optical RS-232 Interface
Serial, Full Duplex, 57600 baud (virtual com port),
multi-function plug connector
Serial, Full Duplex, 57600 baud, no parity, 1 start bit,
1 stop bit
Recommended
Calibration Interval
4 years
a
Temperature Range
Operational: -10°C to +50°C
Non-operational (transport): -30°C to +70°C
Humidity
5 to 95% relative humidity, no condensation;
≤29 g/m³ absolute humidity (IEC 60721-3-2 class 7K2)
Size (minimum) 117.1 x 82.6 x 31.8 mm (4.61 x 3.25 x 1.25 in.)
Weight 0.5 lbs. (0.23 kg), with sensor
Accessories
(included)
AC Charger with Plugs, Car (12VDC) Charger,
Charger/Data cable (USB), Carrying Case, Belt Clip,
Lanyard Clip, User's Guide, NS3-TS Software,
Calibration Certicate(s)
a
Only for basic instrument; sensors are specied separately