14
Safety
• Be advised that the strengths of pulsed
signals (e.g. radar signals) may be
wrongly estimated by field strength
measuring equipment. The ESM
"RadMan" is however designed so that
with the type of radar signals normally
encountered it deviates slightly from the
actual rms value. The 2250/01, 2250/04
and 2250/06 models are particularly
recommended for the BGV B11,
ENV 50166-2 and ICNIRP standards,
which stipulate a special evaluation
method for such signals. Contact your
Sales Agent for more information, quoting
the reference "Radar Application Note".
• Strong, low-frequency electrical fields,
for instance in the vicinity of high-voltage
cables, may sometimes influence the
displayed value, especially when the
RadMan is used as a rapid tester or as a
leak locator.
Warning
Warning instructions
Downloaded from Arrow.com.
To Next Page
Loading...
