24
Operation
and use
If the battery capacity is only sufficient for a
few more hours of operation, the LED display
of operational readiness is replaced by a brief
“beep”.
Resetting the Max Hold function
⇒ Switch the ESM “RadMan” off and then on
again.
Maximum
value
(Max Hold)
LED
display
Battery
status
Loud-
speaker
≥100% 100% Full -
≥100% 100% Empty BEEP
≥50% 50% Full -
≥50% 50% Empty BEEP
≥25% 25% Full -
≥25% 25% Empty BEEP
<25% 12.5% Full -
<25% 12.5% Empty BEEP
Operational readiness, Max Hold
Downloaded from Arrow.com.
To Next Page
Loading...
