27
Operation
and use
Procedure
⇒ Stand in your normal working position and
slowly turn around through a complete
circle.
This allows ESM “RadMan” to better
detect radiation sources that are behind
your back when you are working normally.
⇒ If the alarm sounds, leave the danger area
carefully and without panic.
Tip: If you are working in the vicinity of
short-wave or very short wave
transmitters, ESM “RadMan” may
overestimate the levels of
electromagnetic radiation that are
present.
This is caused by proximity effects of
the human body acting on the
electromagnetic radiation. In such
cases, hold the ESM “RadMan” in your
hand or screw it on to the extension rod
(accessory). Refer to the next section
for details.
Applications and use
Downloaded from Arrow.com.
To Next Page
Loading...
