32
Operation
and use
Using ESM-30 as a data recorder
Applications
The data recorder records the variation with
time of the surrounding electromagnetic
radiation.
If ESM-30 “RadMan XT” is worn as a warning
unit, the exposure of the wearer during the
course of the working day can be recorded.
If ESM-30 “RadMan XT” is used as a rapid
tester, it records the profile of the flux density
in the area under test.
Procedure
⇒ Wear ESM-30 “RadMan XT” as a warning
unit on the body as described above.
– or –
⇒ Fit ESM-30 “RadMan XT” to a non-
metallic tripod and use it as a rapid tester.
⇒ Switch the unit on to start testing.
⇒ Evaluate the recorded values using the
ESM-TS Interface Set available as an
option.
Tip: The ESM-TS Interface Set can be used
to configure recording and to export the
recorded data for evaluation using the
software of your choice.
Applications and use
Downloaded from Arrow.com.
To Next Page
Loading...
