NARDA SignalShark 3310 - Battery and Power Operation; Battery Status and Charging

Slide 9© Narda Safety Test Solutions GmbH www.narda-sts.com
Battery Operation
› Battery Operating Status
The operating status of the batteries is separately displayed
for each battery with 2 LEDs in the keyboard area
› Charging the Batteries
› Charging times for a complete charging cycle are as
follows:
› When both batteries are charged in the device: approx. 4.2
hours (nom.)
› When charged in external charger: approx. 3 hours (nom.)
SignalShark - User Interface Manual
SignalShark 3310 Device Overview
Indicator Significance
LED lights up red Battery is charging.
LED lights up
green
Charging is completed or charger/power supply
is still connected to the charging jack of the unit.
LED is off
No battery is inserted or no charging/power
supply is connected.