cRIO-9073, cRIO-9074
FPGA type Xilinx Spartan-3 2M
Number of flip-flops 40,960
Number of 4-input LUTs 40,960
Number of multipliers 40
Available block RAM 720 kbits
Number of DMA channels 3
For information about the life span of the nonvolatile memory and about best practices for
using nonvolatile memory, go to ni.com/info and enter the Info Code SSDBP.
Internal Real-Time Clock
Accuracy 200 ppm; 35 ppm at 25 °C
Power Requirements
Caution You must use a UL Listed ITE power supply marked LPS with the
cRIO-9072/9073/9074.
Recommended power supply 48 W, 24 VDC
Power consumption 20 W maximum
Power supply input range 19 V to 30 V
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Tip For two-dimensional drawings and three-dimensional models of the C Series
module and connectors, visit ni.com/dimensions and search by module number.
Screw-terminal wiring
Gauge 0.13 mm
2
to 2.1 mm
2
(26 AWG to 14 AWG)
copper conductor wire
Wire strip length 6 mm (0.24 in.) of insulation stripped from the
end
Temperature rating 85 °C
Torque for screw terminals 0.20 N · m to 0.25 N · m (1.8 lb · in. to
2.2 lb · in.)
Wires per screw terminal One wire per screw terminal
Ferrules 0.25 mm
2
to 1.5 mm
2
20 | ni.com | NI cRIO-9072/9073/9074 User Manual and Specifications