Figure 8. sbRIO-962x/sbRIO-963x Ports and Connectors
1. Connector1 (DIO port) (sbRIO-9638 only)
2. Connector0 (MIO port)
3. RS-485 port (ASRL3)
4. RS-232 port (ASRL2)
5. USB Type-A 2.0 host port
6. USB Type-A 2.0 host port
7. MicroSD port
8. Power terminal
9. CAN port
10. USB Type-C 2.0 device port
11. USB Type-C 3.1 host port (with DisplayPort on the
sbRIO-962x)
12. RS-232 serial port with Console Out (ASRL1)
13. RJ-45 Gigabit Ethernet ports
14. RMC connector (sbRIO-962x only)
Table 3. NI sbRIO Connector Descriptions
Connector Description Manufacturer, Part
Number
Recommended
Mating
Connector
NI
Solution
Power 2-position, 3.5 mm Mini-
COMBICON
H = 7.3 mm (0.29 in.)
Sauro,
CTMH029F8-0N0LA
Sauro,
CTF02BV8-
AN000A
NI,
786902-01
RS-232/485/
CAN IDC
Header
10-pin, 0.100 in. CT,
shrouded,
H = 9.398 mm (0.370 in.)
Samtec, TST-105-01-
L-D or
HTST-105-01-L-DV-
P-TR
TE, 1658622-1 NI, 10-pin
to 9-pin
D-SUB,
153158-10
50-Pin IDC
Header
50-pin, 2 mm CT,
Shrouded,
H = 3.937 mm (0.155 in.)
3M, 957250-6002-
AR
TE, 2-111623-6 NI, 50-
position
ribbon
cable,
154041-12
RMC
Connector
240-pin, 40 × 6 position,
high density open pin
field SEARAY
Samtec,
SEAF-40-06.5-
S-06-2-A-K-TR
Samtec,
SEAM-40-03.0-
S-06-2-A-K-TR
—
Samtec SEAM connectors come in multiple heights, indicated in millimeters by the XX.X
portion of the SEAM-40-XX.X-S-06-2 example part number. You can order a mating
CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual | © National Instruments | 11
To Next Page
Loading...
