National Instruments CompactRIO sbRIO-9603 - Sbrio-960 X Dimensions

sbRIO-960x Dimensions
Figure 21. Primary-Side Dimensions
75T
200T
75T FPGA 81.7 mm (3.22 in.)
72.8 mm (2.87 in.)
200T FPGA 80.1 mm (3.15 in.)
15.0 mm (0.59 in.)
DDR Memory
CPLD
37.0 mm (1.46 in.)
39.5 mm (1.55 in.)
51.7 mm (2.04 in.)
NI ASIC 1
59.2 mm (2.33 in.)
OSC
73.3 mm (2.89 in.)
Pin 1
80.8 mm (3.18 in.)
76.7 mm (3.02 in.)
NAND Flash
CPU
46.2 mm (1.82 in.)
38.7 mm (1.53 in.)
USB PHY
24.9 mm (0.98 in.)
ENET 1210
0.0 mm (0.00 in.)
73.2 mm (2.88 in.)
51.8 mm (2.04 in.)
28.4 mm (1.12 in.)
15.4 mm (0.61 in.)
5.4 mm (0.21 in.)
0.0 mm (0.00 in.)
84.6 mm (3.33 in.)
79.4 mm (3.13 in.)
FPGA
65.5 mm (2.58 in.)
55.0 mm (12.16 in.)
43.2 mm (1.70 in.)
NI ASIC 2
8.1 mm (0.32 in.)
24.2 mm (0.95 in.)
Pin 2
28 | ni.com | CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual