National Instruments CompactRIO sbRIO-9603 - Page 29

Figure 22. Secondary-Side Dimensions
98.4 mm (3.87 in.)
96.7 mm (3.81 in.)
0.0 mm (0.00 in.)
26.7 mm (1.05 in.)
5x Ø 3.2 mm (0.13 in.)
65.4 mm (2.57 in.)
0.0 mm (0.00 in.)
3.2 mm (0.13 in.)
40.0 mm (1.58 in.) 43.8 mm (1.73 in.)
76.8 mm (3.03 in.)
96.5 mm
(3.80 in.)
71.7 mm
(2.82 in.)
102.9 mm
(4.05 in.)
73.6 mm
(2.90 in.)
Note Holes and keepouts are sized for M3 standoff (4.5 mm Hex) or 4-40 standoff
(3/16-in. Hex).
CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual | © National Instruments | 29