National Instruments CompactRIO sbRIO-9603 - Sbrio-960 X Mounting Direction Options

Figure 25. Maximum Component Height of Secondary Side
10.2 mm
(0.40 in.)
Maximum Component Height =
7.6 mm (0.30 in.)
Minimum Adjacent Surface Height =
7.6 mm (0.30 in.)
Maximum Component Height =
6.2 mm (0.24 in.)
Minimum Adjacent Surface Height =
7.6 mm (0.30 in.)
11.4 mm
(0.45 in.)
61.0 mm
(2.40 in.)
sbRIO-960x Mounting Direction Options
The Thermal Kit for CompactRIO Single Board Controller with NI-DAQmx (787331-01) and
certain RMC accessories are designed to allow traditional M-F standoff threads to pass
through and stack in either direction.
32 | ni.com | CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual