National Instruments CompactRIO sbRIO-9603 - Page 18

Figure 15. sbRIO-962x/sbRIO-963x RMC Connector Location and Dimensions
98.4 mm (3.87 in.)
96.7 mm (3.81 in.)
0.0 mm (0.00 in.)
0.0 mm (0.00 in.)
3.2 mm (0.13 in.)
40.0 mm (1.58 in.)
Pin 1
Caution RMCs are not hot-swappable. Disconnect power before mating or
unmating.
18 | ni.com | CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual