Mounting a sbRIO-962x/sbRIO-963x Model with a Thermal
Conduction Path
If possible, NI recommends that you mount the sbRIO-962x/sbRIO-963x on a panel or plate,
such that a thermal solution provides a conduction path from the primary side components and
is secured to or made from the panel or plate.
Figure 33. Thermal Conduction Mounting
1. Exploded view of all mounting components
2. Complete assembled and mounted view
3. Mounting screws
4. Standoff, 9.65 mm (0.38 in.)
5. Standoff, 16.0 mm (0.63 in.)
6. Thermal Kit for CompactRIO Single Board
Controller with NI-DAQmx (787331-01)
7. RMC board
8. NI sbRIO-9628/9629/9638
9. Thermal pad, main (Included with the Thermal Kit)
10. Thermal pad, supplemental (sbRIO-9628/9638
only) (Included with the Thermal Kit)
11. Standoff, 18.0 mm (0.71 in.)
12. Mounting Surface
40 | ni.com | CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual
To Next Page
Loading...
