National Instruments CompactRIO sbRIO-9603 - Page 45

Table 19. Approximate Power Requirement
Power Model Values and Calculations
P
int typ
sbRIO-9603 7.1 W
sbRIO-9608 7.6 W
sbRIO-9609 8.0 W
sbRIO-9628 8.5 W
sbRIO-9629 9.5 W
sbRIO-9638 8.5 W
P
int max
sbRIO-9603 19.1 W
sbRIO-9608 21.3 W
sbRIO-9609 24.8 W
sbRIO-9628 22.5 W
sbRIO-9629 26.5 W
sbRIO-9638 22.5 W
P
LVDS
sbRIO-960x and
sbRIO-962x
Number of RMC LVDS outputs × 0.0395 W (maximum
of 45 outputs)
P
µSD
sbRIO-962x and
sbRIO-963x
Total µSD current × 3.3 V/0.8
1.4 A, maximum
0.5 A, typical
P
USB Type-C
All sbRIO-96xx
Total USB current × 5 V/0.9
0.9 A, maximum
0.25 A, typical for flash drive
0.5 A, typical for display
P
USB 2.0
sbRIO-962x and
sbRIO-963x
Total USB current × 5 V/0.9
1.4 A, maximum
0.25 A, typical for flash drive
CompactRIO Single-Board Controller with NI-DAQmx Hardware Installation Manual | © National Instruments | 45