National Instruments GPIB-USB-HS Installation Guide

22 | ni.com | GPIB Hardware Installation Guide and Specifications
Power Requirements
USB bus-powered device
+5 V (VBUS) 140 mA, Typical
500 mA, Maximum
Physical Characteristics
Dimensions 10.7 cm × 6.6 cm × 2.6 cm
(4.2 in. × 2.6 in. × 1.0 in.)
Weight 180 g (6.3 oz), includes USB cable weight
Connector
GPIB IEEE 488 24-pin connector
USB USB standard Type A plug
Jackscrew
Thread M3.5 × 0.6
Torque 0.56 N · m (5.0 lb · in.), maximum
Environment
Operating ambient temperature 0 °C to 55 °C
(Tested in accordance with IEC 60068-2-1 and
IEC 60068-2-2.)
Operating relative humidity 10% to 90%, noncondensing
(Tested in accordance with IEC 60068-2-56.)
Storage ambient temperature -20 °C to 70 °C
(Tested in accordance with IEC 60068-2-1 and
IEC 60068-2-2.)
Storage relative humidity 5% to 95%, noncondensing
(Tested in accordance with IEC 60068-2-56.)
GPIB-USB-HS+
Performance
GPIB
3-wire up to 1830 kbytes/s
HS488 up to 7920 kbytes/s

National Instruments GPIB-USB-HS Specifications

General

Brand	National Instruments
Model	GPIB-USB-HS
Category	Computer Hardware
Language	English