Chapter 3 Setting Up a Design
NI Ultiboard User Manual 3-20 ni.com
For information on any setting, select it in the Group Settings list. A
description appears in the field at the bottom of the dialog. You may need
to make the dialog box larger to view some of the descriptions. Do this by
dragging the dialog’s lower-right corner.
Differential Pair Settings
For differential pairs, the following Group Settings are available:
• Length Constraints
• Space Constraints
For information on any setting, select it in the Group Settings list. A
description appears in the field at the bottom of the dialog. You may need
to make the dialog box larger to view some of the descriptions. Do this by
dragging the dialog’s lower-right corner.
To Next Page
Loading...
