© National Instruments | D-1
D
Upgrading from E Series to
MSeries
This appendix supplies information about the differences between M Series and E Series
multifunction I/O families.
M Series and E Series Pinout Comparison
The pinout of Connector 0 of 68-pin M Series devices is similar to the pinout of 68-pin E Series
devices. On M Series devices, some terminals have enhanced functionality or other slight
differences. Table D-1 compares the two pinouts.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
