NI 9253 Connection Guidelines
• Make sure that devices you connect to the NI 9253 are
compatible with the module specifications.
• You must use 2-wire ferrules to create a secure connection
when connecting more than one wire to a single terminal on
the NI 9253 with spring terminal.
• Push the wire into the terminal when using a solid wire or a
stranded wire with a ferrule.
• Open the terminal by pressing the push button when using
stranded wire without a ferrule.
High-Vibration Application Connections
If your application is subject to high vibration, NI recommends
that you use the NI 9963 backshell kit to protect connections to
the NI 9253 with spring terminal.
10 | ni.com | NI 9253 Getting Started Guide
To Next Page
Loading...
