Glossary
G-2 | ni.com
F
Form A relay a single-pole single-throw (SPST) relay with a default state of
normally open
Form C relay a single-pole double-throw (SPDT) relay that breaks the connection
with one throw before making contact with the other
(break-before-make)
G
GND ground signal
H
hex hexadecimal
I
inductive load A reactive load in which the inductive reactance exceeds the
capacitive reactance and therefore carries a lagging current with
respect to the voltage across the terminals.
L
latching the ability to keep a relay contact in its current state if power is
removed
logic A sequence of functions made up of circuits designed to perform an
operation.
LSB least significant bit
M
MSB most significant bit
To Next Page
Loading...
Need help?
General
