About This Manual
NI 660x User Manual viii ni.com
Related Documentation
The following documents contain information that you might find helpful
as you use this help file:
• NI 660x Specifications—This document contains specifications for the
NI 6601, NI 6602, and NI 6608 devices. It available for download at
ni.com/manuals.
• DAQ Getting Started Guide—This guide describes how to install the
NI-DAQ 7.x software and the DAQ device, and how to confirm that the
device is operating properly.
• NI-DAQmx Help—This help file contains information about using
NI-DAQmx to program National Instruments devices. NI-DAQmx is
the software you use to communicate with and control your DAQ
device.
• Measurement & Automation Explorer Help for NI-DAQmx—This help
file contains information about configuring and testing DAQ devices,
SCXI devices, SCC devices, and RTSI cables using Measurement &
Automation Explorer (MAX) for NI-DAQmx, and information about
special considerations for operating systems.
• DAQ Assistant Help—This help file contains information about
creating and configuring channels, tasks, and scales using the DAQ
Assistant.
• PXI Hardware Specification Revision 2.1—This document introduces
the PXI architecture and describes the electrical, mechanical, and
software requirements for PXI.
Note You can download these documents at ni.com/manuals.
Training Courses
If you need more help getting started developing an application with NI
products, NI offers training courses. To enroll in a course or obtain a
detailed course outline, refer to
ni.com/training.
To Next Page
Loading...
Need help?
General
