Chapter 1 Introduction
PCI/PXI-6703/6704 User Manual 1-2 www.natinst.com
Detailed specifications for the 6703/6704 devices are in Appendix A,
Specifications.
What You Need to Get Started
To set up and use your 6703/6704 device, you will need the following:
❑
One of the following devices:
• PCI-6703
• PXI-6703
• PCI-6704
• PXI-6704
❑
PCI/PXI-6703/6704 User Manual
❑
One of the following software packages and documentation:
• ComponentWorks
• LabVIEW for Windows
• LabWindows/CVI for Windows
• Measure
• NI-DAQ for PC compatibles
• VirtualBench
❑
PC with a free PCI slot or PXI chassis with a free slot
❑
68-pin cable (type SH68-68-D1)
❑
68-pin terminal block (type CB-68)
Unpacking
Your 6703/6704 device is shipped in an antistatic package to prevent
electrostatic damage to the device. Electrostatic discharge can damage
several components on the device. To avoid such damage in handling the
device, take the following precautions:
• Ground yourself via a grounding strap or by holding a grounded
object.
• Touch the antistatic package to a metal part of your PC chassis
before removing the device from the package.
To Next Page
Loading...
Need help?
General
