A-14 | ni.com
Appendix A Specifications
Maximum altitude 2,000 m (800 mbar) at a 25 °C ambient
temperature
Pollution Degree 2
Indoor use only.
Operating Environment
Operating temperature, local
1
0 to 55 °C
Operating humidity 10 to 90%, noncondensing
System air flow 0.4 m/s (80 LFM)
Storage Environment
Ambient temperature range -20 to 70 °C
Relative humidity range 5 to 95%, noncondensing
Safety, Environmental, and Regulatory Information
Read this section before you install, configure, operate, or maintain this product. Users are
required to familiarize themselves with installation and wiring instructions in addition to
requirements of all applicable codes, laws, and standards. Visit ni.com/manuals for more
information about your product, including specifications, pinouts, and instructions for
connecting, installing, and configuring your system.
Icons
Refer to the following descriptions if one of these icons is marked on your product or used in
this guide.
Notice Take precautions to avoid data loss, loss of signal integrity, degradation of
performance, or damage to the product.
Caution Take precautions to avoid injury. Consult the product documentation for
cautionary statements when you see this icon printed on the product. Cautionary
statements are localized into French for compliance with Canadian requirements.
1
For PCI Express adapter cards with integrated air movers, NI defines the local operational ambient
environment to be at the fan inlet. For cards without integrated air movers, NI defines the local operational
ambient environment to be 25 mm (1 in.) upstream of the leading edge of the card. For more information
about the local operational ambient environment definition for PCI Express adapter cards, visit
ni.com/info and enter the Info Code pcielocalambient.
To Next Page
Loading...
Need help?
General
