National Instruments PCI-8361 - Connecting Additional Expansion Chassis to a System; Equipment Needed; Using a MXI-Express X1 Copper or Fiber Cable

2-4 | ni.com
Chapter 2 Getting Started
Connecting Additional Expansion Chassis to a
System
Using a MXI-Express x1 Copper or Fiber Cable
Refer to the Terminology section for more detail on the items in this list.
Equipment Needed
 Chassis (or embedded controller with ExpressCard slot) to daisy-chain from
 Expansion chassis to daisy-chain to
 MXI-Express x1 copper cable or MXI-Express x1 fiber cable
 A MXI-Express x1 host board and target board that is appropriate for the host system slot
and target chassis. Refer to Table 2-2 for more information.