National Instruments PXI-1042Q - Page 62

Index
© National Instruments Corporation I-3 NI PXI-1042 Series User Manual
peripheral slots
overview, 1-7
P1 (J1) connector pinouts (table), B-6
P2 (J2) connector pinouts (table), B-7
pinouts, B-1
DB-9 connector (table), 2-8
P1 (J1) connector
peripheral slot (table), B-6
Star Trigger slot (table), B-4
system controller slot (table), B-2
P2 (J2) connector
peripheral slot (table), B-7
Star Trigger slot (table), B-5
system controller slot (table), B-3
power cables (table), 1-2
power supply
connecting to, 2-4
remote voltage monitoring and inhibiting
interface, 2-8
replacing
configuration, 3-5
connecting safety ground, 3-5
connecting to power source, 3-5
installation, 3-4
removal, 3-4
voltages at voltage monitoring connector
(DB-9) (table), 2-8
power switch LED indicator, 2-8
power up, testing, 2-4
programming examples (NI resources), C-1
PXI controller, 2-4
installing in a PXI-1042 chassis
(figure), 2-6
PXI_CLK10, 1-8
PXI_CLK10_IN pin, 1-8
PXI-1042 series
cooling air intake (figure), 2-2
fan speed, setting, 2-2
front view (figure), 1-3
installation. See installation,
configuration, and operation
key features, 1-2
maintenance. See maintenance of
PXI-1042 series
optional equipment, 1-5
rack mount kits, 1-5
rack mounting, 2-3
rear view of pxi-1042 chassis, 1-4
rear view of pxi-1042Q chassis, 1-5
safety ground, connecting, 2-3
unpacking, 1-1
PXI-1042 series backplane
interoperability with CompactPCI, 1-6
local bus, 1-7
overview, 1-6
peripheral slots, 1-7
specifications, A-7
star trigger (ST) slot, 1-7
system reference clock, 1-8
trigger bus, 1-8
R
rack mount kit dimensions (figure), A-11
rack mount kits, 1-5
rack mounting, 2-3
related documentation, viii
remote voltage monitoring and inhibiting
interface, 2-8
S
safety ground, connecting, 2-3
safety specifications (table), A-6
service interval, 3-1
setting fan speed, 2-2
slot blocker installation, 2-3
slot blocker kit, 1-6
software (NI resources), C-1