© National Instruments Corporation 13 160-Pin Cable for the NI PXI-2530B Installation Instructions
Specifications
Maximum voltage ..................................................60 VDC/30 VRMS, CAT I
Maximum current ..................................................0.4 A
Caution Do not connect to MAINs supply circuits (e.g., wall outlets) of 115 or 230 VAC. Refer to
the Read Me First: Safety and Electromagnetic Compatibility document at ni.com/manuals for
more information about Measurement Categories.
Weight ....................................................................1206.6 g (42.6 oz)
Environment
Operating temperature ...........................................0 °C to 55 °C
Storage temperature ...............................................–20 °C to 70 °C
Relative humidity...................................................5% to 85%, noncondensing
Pollution Degree ....................................................2
Maximum altitude..................................................2,000 m
Indoor use only.
Safety
This product meets the requirements of the following standards of safety for electrical equipment for
measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
To Next Page
Loading...
