National Instruments PXIe-5160 User Manual

Verifying the System Requirements
To use the NI-SCOPE instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
ni.com/manuals, for more information about minimum system requirements, recommended
system, and supported application development environments (ADEs).
Unpacking the Kit
Refer to the following figure to identify the contents of the PXIe-5160/5162 kit.
1
42
3
1. PXIe-5160 or PXIe-5162
2. PXIe-5160 or PXIe-5162 Safety, Environmental,
and Regulatory Information
3. PXIe-5160/5162 Getting Started Guide (this
document)
4. Maintain Forced-Air Cooling Note to Users
Notice To prevent electrostatic discharge (ESD) from damaging the module,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the module from the package and inspect it for loose components or other signs
of damage.
Notice Never touch the exposed pins of connectors.
Note Do not install a module if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
2 | ni.com | PXIe-5160/5162 Getting Started Guide

National Instruments PXIe-5160 Specifications

General

Brand	National Instruments
Model	PXIe-5160
Category	Test Equipment
Language	English