18 | ni.com | RMC-8357 Installation Guide
Installation Category.........................................II
Pollution Degree ...............................................2
Acoustic Emissions
Sound pressure level (at operator position) ......<70 dBA
Safety
This product is designed to meet the requirements of the following standards of safety for test
and measurement equipment:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Caution Overloading the circuits may damage supply wiring. Do not exceed the
ratings on the equipment nameplate when connecting equipment to the supply circuit.
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance
information. To obtain product certifications and the DoC for this product, visit ni.com/
certification, search by model number or product line, and click the appropriate link
in the Certification column.
To Next Page
Loading...
Need help?
General
