© National Instruments 49 NI sbRIO-960x/962x/963x OEM Instructions & Specifications
Analog Input Characteristics
NI sbRIO-9623/9633
Number of channels ............................... 16 single-ended
ADC Resolution..................................... 12 bits
Maximum aggregate sampling rate........ 500 kS/s
Input range ............................................. 0–5 V nominal
Input impedance
Powered on, idle ............................. 250 MΩ
Acquiring 500 kS/s ......................... 325 kΩ
Powered off/overload...................... 1 kΩ
Overvoltage protection........................... None
AI accuracy
Note For information about measuring the local ambient temperature, refer to the
Environmental section.
INL ......................................................... ±0.024% of range
DNL ....................................................... ±0.024% of range
Input bandwidth (-3 dB)......................... 6 MHz
NI sbRIO-9626/9636
Number of channels ............................... 16 single-ended or 8 differential
ADC Resolution..................................... 16 bits
Maximum aggregate sampling rate........ 200 kS/s
Input range ............................................. ±10 V, ±5 V, ±2 V, ±1 V
Measurement
Conditions
Percent of Reading
(Gain Error)
Percent of Range
*
(Offset Error)
Typical (25 °C, ±5 °C) 0.11% 0.03%
Max (–40 to 85 °C) 0.55% 0.16%
*
Range = 5 V
To Next Page
Loading...
