NI sbRIO-961x/9612XT/963x/9632XT/964x/9642XT 44 ni.com
Protection
Overvoltage .....................................±25 V at 25 °C
Short-circuit.....................................Indefinitely
Power-on voltage....................................0 V
Note All analog outputs are unpowered until a value is written to an analog output.
Update time
One channel in use...........................3 μs
Two channels in use ........................5 μs
Three channels in use ......................7.5 μs
Four channels in use ........................9.5 μs
Noise
Updating at 100 kS/s .......................600 μV
rms
Not updating ....................................260 μV
rms
Slew rate .................................................4 V/μs
Crosstalk .................................................76 dB
Settling time (100 pF load, to 1 LSB)
FS step .............................................20 μs
3 V step............................................10 μs
0.1 V step.........................................8 μs
Glitch energy
(256 steps, worst case)............................2 mV for 2 μs
Capacitive drive ......................................1,500 pF min
Monotonicity ..........................................16 bits
Differential nonlinearity .........................–1 to 2 LSBs max
Integrated nonlinearity (endpoint) ..........16 LSBs max
To Next Page
Loading...
Need help?
General
