Native Instruments Guitar Rig 5 - Page 38

Component Preset selection
Double-clicking the Component Preset in the SideKick has the same effect as double-
clicking a basic component, depending on the state of the Rack:
▪ If no rack module is highlighted, the component will be added to the end of the rack
with the stored settings.
▪ If a component is highlighted, it will be replaced with the new, pre-configured compo-
nent.
▪ If the same component is highlighted in the rack, its settings will be updated with the
Component Preset. This is useful if you quickly want to check out different settings of
a component in the context of your current rack.
Saving Component Presets
Once you have found a good setting for a component you use regularly, you will want to
save your own Component Preset. To do this you will want to create a Bank. The Banks are
user-defined categories where Component presets are stored.
Working with Presets
Component Presets
GUITAR RIG 5 - Application Reference - 38