Native Instruments TRAKTOR KONTROL Z1 User Manual

5.4.6 Headphone and Cue Control Area
The headphone control area on the Z1.
▪ CUE VOL (headphone volume) knob: Use this knob to adjust the headphone volume level
on your Z1. Headphone volume output is off when the knob is turned all the way counter-
clockwise and it is at its fullest when the knob is turned all the way clockwise.
▪ CUE MIX (headphone cue mix) knob: This knob directly adjusts the cue mix. When it is
turned all the way counterclockwise, the headphones will output the cue channel only.
When the knob is all the way clockwise, it will output the master signal only. When the
knob is at the center position, the headphones will receive a blend of both output busses.
Fading between the two positions will mix between the two signals.
▪ A and B (headphone channel cue) buttons: The two headphone cue buttons are located
just below the CUE MIX knob and control the monitor function. When on, the channel's
audio is sent to the headphone bus so that you can monitor it. To understand how cue
buttons can be used in conjunction with the MODE function to achieve Deck playback or
pausing, refer to sections ↑3.1.5, Triggering Deck Playback or Pause in TRAKTOR,
↑4.1.7, Triggering Deck Playback or Pause in TRAKTOR DJ
TRAKTOR KONTROL Z1 Hardware Reference
Top Panel
TRAKTOR KONTROL Z1 - Manual - 28

Native Instruments TRAKTOR KONTROL Z1 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL Z1
Category	Accessories
Language	English