There are four areas with Z1 specific settings here: Restore Default, Calibration, LEDs, MIDI
Mode.
See the following sections for further description:
6.1.1 Restore Default
The Restore Default area in the Z1 preferences.
Click this button to restore all Z1 settings to the factory settings.
6.1.2 Calibration
The Calibration area in the Z1 preferences.
Use these controls if your Z1's controls appear to have decalibrated. Pressing one of the but-
tons will recalibrate the relevant mixer controls.
6.1.3 LEDs
The LEDs area in the Z1 preferences.
Appendix
The Z1's Preferences in TRAKTOR
TRAKTOR KONTROL Z1 - Manual - 32
To Next Page
Loading...
