What to do if Natus Measuring Instruments has a missing or bad signal?
If you're experiencing a missing or bad signal with your Natus Measuring Instruments, try swapping cables to the Breakout Box. You can also run a channel test to diagnose the issue.
How to run a channel test on Natus Measuring Instruments?
To run a channel test on Natus Measuring Instruments: 1. Set the LFF to 0.1 Hz on the montage settings toolbar. 2. Go to Controls->Channel Test. 3. Click Sine or Square in the first menu on the Channel Test control bar. 4. Adjust the waveform frequency and amplitude on the Channel Test control bar as needed.
General| Brand | natus |
|---|---|
| Model | neuro Brain Monitor |
| Category | Measuring Instruments |
| Language | English |
Specifies the intended application and environment for the Natus Brain Monitor Amplifier.
Outlines the essential performance characteristics as defined by IEC 60601-2-26 and ISO 80601-2-61 standards.
Lists the international and national standards the Brain Monitor & Embla Dx Series Amplifiers comply with.
Enlists the specific safety standards and normative references the system adheres to for compliance.
Lists the EMC standards and normative references the system complies with for electromagnetic compatibility.
Lists conditions for non-use and combines general warnings, safety cautions, and specific alerts for proper operation.
Details precautions to prevent damage from electrostatic discharge (ESD) during handling.
Provides critical warnings and cautions related to electrical connections and system servicing.
Outlines safety precautions for the patient environment and interactions with the system.
Provides detailed steps and techniques for handling components to prevent damage from static electricity.
Lists detailed technical specifications for the Brain Monitor & Embla Dx Series Amplifiers.
Details warnings and cautions related to tilting trolleys and potential tipping hazards during transport.
A checklist of common issues and checks to perform when troubleshooting waveform acquisition problems.
Provides guidance on diagnosing and resolving issues related to poor or missing signal quality.
Outlines a systematic approach to documenting incidents and contacting technical support for assistance.
To Next Page
