Do you have a question about the natus OLYMPIC BILI-METER 22 and is the answer not in the manual?
Brand | natus |
---|---|
Model | OLYMPIC BILI-METER 22 |
Category | Measuring Instruments |
Language | English |
Explains symbols and text conventions used in the manual.
Lists and defines symbols found on the device and packaging.
Specifies the primary application of the Bili-Meter as a spectroradiometer.
Provides an overview of the Bili-Meter's readout and detachable sensors.
Describes the sensor used for overhead phototherapy lights.
Describes the sensor for phototherapy pads and mattresses.
Explains how the device measures therapeutic irradiance of phototherapy lights.
Defines the units (μW/cm²/nm) used for irradiance readings.
Shows the device's spectral response matching bilirubin action spectrum.
Step-by-step guide to connect the sensor to the readout unit.
Instructions for cleaning the Bili-Meter device using a soft cloth.
Procedure for replacing the device's 9-volt alkaline battery.
Explains the factory calibration and annual recalibration requirements.
Instructions on how to send the device for calibration or repair.
Contact details for ordering parts or obtaining customer support.
Defines the primary application of the Bili-Meter as a spectroradiometer.
Details the measurement range (425-475 nm) and units for irradiance.
Provides physical measurements and weight for components.
Lists electrical requirements (battery) and environmental operating conditions.
Lists relevant safety standards, certifications, and classifications.
Refers to returning the device for service as it has no user-serviceable parts.
States the warranty period for the Bili-Meter.
Discusses compliance with EMC standards and potential interference.
Provides guidance on the proper disposal of the Bili-Meter.