CL40 Antenna Technical Instruction Manual Page 2-35
Section 2 Preparation for Use and Installation Issue 3.0
Figure 2-20: Installing Solar Light Mounting Assembly
(top of antenna shown)
SOLAR LIGHT
SSEMBL
ANTENNA
RADIALS
MOUNT USING EXISTING
U-BOLTS AND NUTS THAT
SECURE RADIALS
(BOTH SIDES)
INSTALL BEFORE ERECTING ANTENNA!!
Temporarily remove the nuts from the U-bolts securing two radials
on opposite sides.
Remove the plate from the solar light assembly to locate its on/off
and configuration switches. See the solar light’s manual (provided
with solar light) to set the switches as desired.
Install the solar light assembly over the open U-bolts. Secure using
nuts removed in the previous step.
To Next Page
Loading...
