CL40 Antenna Technical Instruction Manual Oct.18.11
Contents Page
List of Tables
1-1 Tools Required 1-2
2-1 Loading Coil Configuration versus Frequency (standard antennas) 2-4
2-2 Antenna Reactance vs Frequency 2-6
2-3 Loading Coil Configuration versus Frequency (Top Loading Kit only) 2-26
3-1 Mechanical Parts List, CL40 Antenna (Nautel # 199-9000-04) 3-2
3-2 Hardware Kit, CL40 Antenna (Nautel # 199-9064-03) 3-3
3-3 Ancillary Kit, CL40 Antenna (Nautel # 199-9072) 3-3
3-4 Top Loading Kit, CL40 Antenna (Nautel # 199-9085) 3-4
3-5 Guy Wire Kit, CL40 Antenna (Nautel # 199-9087) 3-4
List of Figures
2-1 CL40 Antenna (Lowered Position) 2-7
2-2 CL40 Antenna (Fully Assembled, Raised Position) 2-8
2-3a Standard Concrete Base 2-9
2-3b Non-Standard Base 2-10
2-4 Winch Mounting 2-11
2-5 Bottom Clamp Mount 2-12
2-6 Lower Mast Splice Joining 2-13
2-7 Lift Bracket/Lightning Bypass Bracket/Weather Protector 2-14
2-8 Upper Mast Splice 2-15
2-9 Upper Mast into Insulator 2-16
2-10 Radials/Ring/Plate 2-17
2-11 Vertical Radiator/Connector Cable 2-18
2-12 Wooden ‘A’ Frame 2-19
2-13 Mounting Loading Coil Enclosure A1 2-20
2-14a Loading Coil Configuration, Series Connected 2-21
2-14b Loading Coil Configuration, Parallel Connected 2-22
2-15a Ground Mat Installation, 6 Radials 2-23
2-15b Ground Mat Installation, 60 Radials 2-24
2-16 ATU Mounting 2-25
2-17a Top Loading Kit – Site and Foundation Preparation 2-27
2-17b Guy Wire Kit – Site and Foundation Preparation 2-29
2-18 Top Loading Kit – Installation Details 2-31
2-19 Guy Wire Kit – Installation Details 2-33
2-20 Installing Solar Light Mounting Assembly 2-35
To Next Page
Loading...
