22
14. Troubleshooting
Error Error Message Solution
E1
Rx Communication
Failure
Check whether the tail light is on, if not, replace the controller or
instrument. If it is on, please check whether the wire connection between
controller and instrument.
E2 Braking Error Check the wire connection or replace the brake level.
E3 Accelerator Error Check the wire connection or replace the accelerator.
E4 Wheel Motor Error
Check whether the wheel motor and the controller cord are well
connected or replace the motor.
E5 Controller Error Check the controller wire connection or replace the controller.
E6 Overheating Warning Wait until the motor temperature normalizes before resuming use.
EU Declaration of Conformity
This device meets the EU requirements on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
Hereby, Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. declares that the radio equipment
type: K2A-N30AE is in compliance with Directive 2014/53/EU and 2006/42/EC. The full text of the EU
declaration of conformity is available at the following internet address: www.naveetech.com
To Next Page
Loading...
