Navien NaviLink Lite User Manual

24
3
Press the Mode button and enter your 4-digit password. Use the Up (+) or Down (-)
buttons to increase or decrease numbers and the Diagnostic button to move between
digits.
4
When you are done, press the Mode button.
5
Press the Up (+) or Down (-) buttons to move to the X. parameter setting for NCB
models and the 9. parameter setting for NHB models, and then press the Mode
button to enter Parameter Edit mode.
6
Press the Up (+) or Down (-) buttons to change the parameter value.
Display
Description
NCB models
(X. parameter)
NHB models
(9. parameter)
psi
O/R
S
R
psi
O/R
S
R
NaviLink connection enabled (ON)
psi
O/R
S
R
psi
O/R
S
R
NaviLink connection disabled (OFF)

Navien NaviLink Lite Specifications

General

Brand	Navien
Model	NaviLink Lite
Category	Remote Control
Language	English