Navien NaviLink Lite User Manual

18
Connecting to Navien Boilers/Water Heaters
You can remotely control and monitor boilers or water heaters by connecting them to the
NaviLink Lite communication port and setting parameters on the front panel of boilers or
water heaters.
Connecting to a single boiler/water heater
You can connect the NaviLink Lite and a boiler or water heater via the NaviLink Lite cable.
1
Connect the RS-485 connector of the NaviLink Lite cable to a communication channel
port.
2
Connect the 5-pin connector of the NaviLink Lite cable to the boiler or water heater.

Navien NaviLink Lite Specifications

General

Brand	Navien
Model	NaviLink Lite
Category	Remote Control
Language	English