11. Annex A. Controller menu and configuration settings
Important: Menu item availability depends on the user rights and device modification. User
rights can be managed only from the admin account secured by the admin password.
1. AC Fault report address
Network address of web service
processing alarm messages generated by
meters
3. AC Fault message send
retry
Times to retry sending the message
4. AC Fault message send
timeout
Timeout period of acknowledgment
reception of alarm message
5. Plug&Play server address
Plug & Play function alarm url address
6. Plug&Play message send
retry
Times to retry sending the plug&play
message
7. Plug&Play message send
timeout
3. Menu language of [Public]
4. Menu language of [User]
5. Menu language of [Admin]
6. Menu language of
[SuperAdmin]
7. Device reboot period
0.
Reboot time value in minutes. If there are
no queries coming via GPRS or CSD
during specified time, controller will
automatically reboot. After each GPRS or
CSD query by reboot time is set to initial
value
Auto / Manual firmware download and
update
Manually run firmware update
Notes about the device can be added here
13. Restore factory defaults
Restore system settings to factory defaults
without loosing user data (provider
settings, baud rate data is not affected)
Restarts the controller immediately after
pressing <Enter> key