Need help?Do you have a question about the Navman FUEL 3100 and is the answer not in the manual?
Outlines the general process for accessing and modifying setup data.
Covers initial configuration for fuel tanks, engines, and speed input.
Visual guide for navigating Fuel, DSL/SEN, and Speed menus.
Details the process for calibrating fuel flow sensors for accuracy.
Guides selection of speed input sources like GPS or paddlewheel sensors.
Guides on calibrating speed sensor using trip log distance.
Details calibrating speed sensor using known boat speed.
Explains configuring the unit for different tank and engine setups.
Instructs on installing the petrol and diesel fuel flow sensors.
Shows wiring diagrams for FUEL 3100 and DIESEL 3200 power and data cables.
Outlines steps for testing the installation of instruments and sensors.
Lists common causes and checks for the unit failing to power on.
Explains issues when the 'SIM' indicator is active and readings are odd.
Provides troubleshooting steps for inaccurate fuel consumption readings.
Offers solutions for incorrect or erratic speed measurements.
Addresses issues where the low fuel alarm triggers erroneously.
Troubleshooting steps when the unit shows no fuel flow or low fuel.
Discusses reasons for inaccurate fuel used/remaining data and solutions.
Troubleshoots why only one engine's flow rate is displayed in a twin setup.
Explains why fuel economy readings might be missing and how to fix it.
To Next Page
General