Need help?Do you have a question about the Navman M-Nav 800 and is the answer not in the manual?
General| Device Category | GPS |
|---|---|
| Brand | Navman |
| Model | M-Nav 800 |
| Display Size | 4.3 inches |
| Resolution | 480 x 272 pixels |
| GPS Receiver | SiRFstarIII |
| Bluetooth | Yes |
| Voice Guidance | Yes |
| Display Type | TFT LCD |
| Memory | 64 MB RAM |
| Battery | Rechargeable lithium-ion |
| Traffic Updates | Yes |
Device complies with FCC rules for operation and interference.
Copyright notice for Navman Wireless Holdings LP.
Critical safety instructions for device mounting and operation to prevent accidents.
Legal disclaimer regarding product use and liability.
Definitions of key terms and acronyms used in the manual.
Lists and illustrates all items included in the M-Nav 800 package.
Identification and description of the physical components of the M-Nav 800.
Detailed technical specifications and performance metrics of the M-Nav 800.
Instructions for securely mounting the docking cradle onto the vehicle's windshield.
Procedure for connecting the M-Nav 800 unit into its installed docking cradle.
Guide for connecting the optional traffic antenna to the device.
Initial setup for language selection and acknowledgement of system warnings.
Process for logging in as a driver and updating current work status.
Procedure for performing and recording vehicle inspections.
Instructions for navigating between the messaging and navigation interfaces.
Guide to verifying the GPS signal strength and satellite acquisition.
How to monitor the communication status of the Qube tracking device.
Steps to properly log out of the M-Nav 800 after work completion.
Procedure for safely powering down the M-Nav 800 device.
Explanation of different message formats: Information, Route-To, and Form.
How the device alerts users to and handles new incoming messages.
Instructions for accessing and viewing previously received messages.
Methods for replying to messages using pre-set templates or custom forms.
Detailed steps for completing reply forms using various input methods.
Accessing and reviewing sent messages and replies.
Steps for composing and sending new messages or free-text replies.
Using Route-To messages to navigate directly to a specified address.
Displaying a message's destination address on the map.
Procedure for removing messages from the device.
Steps to connect a compatible Bluetooth-enabled mobile phone.
How to view real-time engine parameters and alerts.
Reviewing engine monitoring statistics for a specific trip.
Configuring various settings for the Engine Monitoring System.
Customizing the layout of the EMS Dashboard display.
Updating driver status (e.g., driving, break) for work time tracking.
Configuring the display format for dates and times.
Setting the device's time zone for accurate time display.
Selecting the user interface language for the M-Nav 800.
Configuring whether the language selection menu appears on startup.
Enabling or disabling audible feedback for button presses.
Performing diagnostic tests on the Qube tracking device for troubleshooting.
Resetting the device to its original factory configuration.
To Next Page