Version 13 – 01/2019
13
5.3 Measurement data
5.3.1 Saving
All measured data are automatically stored on the meter.
The data of each measurement is shown on the display as long as probe and measuring
device are connected.
You can retrieve the individual measurement data from your PC.
The measurements remain stored on the meter until you manually clear them (see
chapter 5.3.3).
5.3.2 Readout / Recall
Connect the measuring device (9) and the charging station (7).
Connect the charging station via USB cable to your PC / laptop / tablet PC.
The pH meter is displayed as external memory on your PC.
All measurements are saved as Excel files and labeled with the date and time
of each measurement (e.g., "2018-10-18_17-07-18").
These files contain the pH value, temperature, date, time and a security key
(against manipulations).
The data on the pH meter's memory can only be deleted at the PC.
5.3.3 Deleting
The measured data are stored on the meter and can be viewed on the PC.
The stored data on the pH meter's memory can only be deleted at the PC.
To Next Page
Loading...