If a module conflict is detected, vSpace changes the color of the administrator’s
system tray “console icon” from green to either yellow or red depending on the
severity of the problem that could be caused by the conflict. (See above table of
screen shots.) At the same time, a “Warning” message will be shown on the
administrator’s console session recommending a software update be applied to
the NComputing vSpace software. (The administrator warning message will be
shown every time the system reboots until the MS update is removed or until an
NComputing update for the module has been applied. – See screen shot below.)
If a Microsoft update has created one of these conflicts, a new software version
will be distributed very quickly through the vSpace automatic software update
feature.
To Next Page
Loading...
Need help?
General
