of available USB ports is displayed where you can select which one(s) is/are to
be connected to the selected device. This list shows each access device's MAC
address and its serial number along with a checkbox.
When you click on the "Apply" button, changes to the USB-Device assignments are
saved. To discard changes, simply navigate to another tree item or close the console
without clicking on the "Apply" button.
Software Settings (LAN)
The "Software Settings (LAN)" tree allows you to see and change settings for the host
PC and all other PCs on the network that are running the vSpace software. Once you
select a server in the tree, the same settings are present as are in the "Software Settings
(local)" tree item.
To Next Page
Loading...
Need help?
General
