Hardware Settings (LAN/local)
The "Hardware Settings (LAN/local)" tree allows you to see and change settings for all
access devices on the network.
When you select the "UTMA/UTSA Devices" tree item, there is a table in the right side of
the window that contains information about each access device. There is a very wide
variety of information available for each access device. Clicking on the "Columns" button
enables you to select what columns are displayed. You can select a preconfigured group
of columns or you can click on the "Advanced" button to select individual columns to
display.
To Next Page
Loading...
Need help?
General
